LASAR, Inc. manufactures modification kits that enhance the performance and functionality of Mooney airplanes. LASAR kits are described below.

To buy STC Kits, call us at 707-263-0412 (Option 2 for Parts), email the parts department or order online.

Please note: all STC kits require the completion of legal paperwork, and some components are made to order. This may affect shipping dates.

 

LASAR STC’d Kits

 

Flap Gap Seals (M20B-M20G)

No. 100
Speed Increase Parts Hardware & STC Labor Hours
2.5 mph See Online Store For Pricing & Availability 12+

Description
Channels & seals which fill the cavity in the flap well. Increases not only speed but also the rate of climb.


Aileron Lower Gap Seals (M20B-M20K) 

No. 101
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 4+

Description
Extends the bottom wing skins rearward to close the gap throughout the travel range of the ailerons.


Flap Hinge Covers (M20B-M20J)

No. 102
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 5

Description
Streamlines the flap hinges with 8 fairings.


Flap Hinge Covers - Inboard Fairings Only (M20B - M20J)

No. 102A
Speed Increase Parts Hardware & STC Labor Hours
0.5 mph See Online Store For Pricing & Availability 4+

Description
Streamlines the inboard flap hinges with 2 fairings.


Wheel Well Liner (M20B – M20K)

No. 103A
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 4+

Description
Reduces the turbulent air flow in the main wheel well, and provides a barrier for mud, debris & mice.


Brake Wheel Cylinder Rotation (M20B – M20K; STC Authorization Only, No Parts Required)

No. 103B
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 4+

Description
Reverses the brake calipers out of the slip stream when the gear is retracted.


Dorsal Fin Vertical Seal (M20B – M20G)

No. 104
Speed Increase Parts Hardware & STC Labor Hours
2.0 mph See Online Store For Pricing & Availability 4+

Description
A two-part assembly that can either be added to the aircraft or replace the existing dorsal fin. The skirt, attached to the vertical stabilizer, is contoured to slide into the dorsal fin and maintains a constant seal throughout the trim travel range of the moveable tail.


Tail Root Horizontal Fairing (M20B – M20J)

No. 105
Speed Increase Parts Hardware & STC Labor Hours
2.0 mph See Online Store For Pricing & Availability 5+

Description
This fairing contours the rounded tailcone by providing a flat uniform surface to narrow the gap between the tailcone and horizontal stabilizer in all positions.


(*Currently Unavailable*) Wing Tip Fairings (M20B – M20J)

No. 107
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 6+

Description
This kit incorporates late style wing tips without having to replace the ailerons.


(*Currently Unavailable*) Wing Tip Fairings With Nav. Antennas (M20B – M20J)

No. 107A
Speed Increase Parts Hardware & STC Labor Hours
2.0 mph See Online Store For Pricing & Availability 10+

Description
Provides greater VOR reception and reduces drag from fin mounted antennas.


Wing Root Leading Edge Fairing (M20B – M20J)

No. 108
Speed Increase Parts Hardware & STC Labor Hours
1.5 mph See Online Store For Pricing & Availability 8+

Description
Enhances a smooth air flow at the wing/fuselage intersection. Reduces stall speed by approximately 2 mph and improves handling characteristics.


Rudder & Elevator Hinge Covers (M20A – M20K)

No. 112
Speed Increase Parts Hardware & STC Labor Hours
2.0 mph See Online Store For Pricing & Availability 3+

Description
Closes gaps at each hinge. Prevents air flow from spilling from one side of the control surface to the other, while providing a net gain in airspeed.


201 Windshield Retrofit (M20C – M20G)

No. 119
Speed Increase Parts Hardware & STC Labor Hours
3.0 mph See Online Store For Pricing & Availability 50+

Description
Installs a 201 style windshield onto older models. Improves visibility, increases speed and reduces cabin noise. Kit comes complete with 1/4 inch clear, green, or grey tint windshield (UV glass available for an additional fee), cowl deck, retainer, defroster vents, glareshield, upper windshield molding, and installation kit.


One Piece Windshield (M20 – M20F)

No. 120
Speed Increase Parts Hardware & STC Labor Hours
0 mph See Online Store For Pricing & Availability 15+

Description
Replaces the existing two piece windshield with a 1/4 inch thick single piece green, grey, or clear windshield (UV glass available for an additional fee). Improves strength and sound proofing effects. Kit includes compass mounting parts.


Oversize Bushing - Nose Gear Pivot (M20 - M20TN)

No. 122A
Speed Increase Parts Hardware & STC Labor Hours
0 mph See Online Store For Pricing & Availability 2+

Description
Resolves fore and aft shimmy in nose gear. Resizes worn truss in order to install a .005 or .010 oversize bushing, restoring nose gear pivot to proper tolerances. Reamers available on request.


Oil Cooler Relocation (M20E – M20F, 1967 & later with open baffle)

No. 126
Speed Increase Parts Hardware & STC Labor Hours
1.0 mph See Online Store For Pricing & Availability 10+

Description
Moves the oil cooler from the lower cowl to a position behind the #4 cylinder. Provides better air distribution for both the cylinders and the oil cooler, while streamlining the lower cowl. Fits 200hp models with open baffle system.


200 HP Conversion (M20C, M20D, M20G, M20E&F; STC Authorization Only, No Parts Included)

No. 127
Speed Increase STC & Instructions ONLY Labor Hours
4.0 mph See Online Store For Pricing & Availability 80+

Description
Retrofits the 200 hp Lycoming IO-360-XXX engine to the M20 C, D, & G model 180 HP Mooney. This STC also allows other 200 HP Lycoming Engine model options for the M20E & F, including the IO-360A1B6, as well as Hartzell and McCauley propeller options. Kit contains instructions & STC only.


Smooth Belly (M20F, G, J & K - LONG BODY)

No. 129A
Speed Increase Parts Hardware & STC Labor Hours
6.0 mph* See Online Store For Pricing & Availability 70+

Description
Replacement of the multi-segmented belly skins with a smooth aerodynamically contoured one-piece fairing. Eliminates needless hours of removing screws and can conceal various antennas. *This can account for up to 6 MPH by burying some typical antennas.

Smooth Belly (M20C & M20E - SHORT BODY)

No. 129B
Speed Increase Parts Hardware & STC Labor Hours
3.0 mph See Online Store For Pricing & Availability 35+

Description
Replacement of the multi-segmented belly skins with a smooth aerodynamically contoured one-piece fairing. Eliminates needless hours of removing screws and can conceal various antennas, adding speed.


Cowl Enclosure Fairing (M20A – M20G)

No. 131
Speed Increase Parts Hardware & STC Labor Hours
5.0 mph See Online Store For Pricing & Availability 5+

Description
Specially designed cowl enclosure fairing is installed to reduce the larger air inlet on the older models, providing efficient engine cooling and airspeed gain, and reduce cabin noise.


(Currently Unavailable) LASAR WISER VISORS (Pair)

No.146
Speed Increase Parts Hardware & STC Labor Hours
0 See Online Store For Pricing & Availability 1+

Description
Fully articulating Sun Visors for the Mooney. PMA replacement for most models and will fit all others with adapter mount. These visors can be positioned everywhere you want them.


(Currently Unavailable) Steering Horn Assembly (M20C – M20S)

No.148
Speed Increase Parts Hardware & STC Labor Hours
0 See Online Store For Pricing & Availability 3+

Description
PMA LASAR Steering Horn which has fewer moving parts, requiring less maintenance. Features life time aluminum/nickel/bronze bushings, heat-treated T-Shaft and a new clamp-on pivot stud for positive alignment. Ask about our Rebuilt Steering Horns.


LASAR Stainless Steel Kit

No. SS KIT (INCLUDES: SS TIE DOWN WING, SS TIE DOWN TAIL, SS WHEEL COVER, SS NOSE COVER)
Speed Increase Parts Hardware Labor Hours
0 See Online Store For Pricing & Availability 1+

Description
Attractive Hub Caps for the Nose gear and Main gear (set of 4) Includes mounting hardware for the 3 hole predrilled wheels. Kit also includes a Tail skid and Wing Tie downs/ Jack pads. The strong Tie downs are a combination ring and cone for jacking the airplane. Parts may be purchased individually.


Latch Casting Socket

No. LA5600006-003
Speed Increase Parts Hardware Labor Hours
0 See Online Store For Pricing & Availability 2+

Description
PMA Replacement Down lock Socket for all manual gear Mooneys. P/N LA560006-003 Replacement for 560006-003 and 560006-005.


Gear Torque Tools (Not a Mod - Click Here to Order)

No. GSE030007-100* and GSE030008-100*
Speed Increase Parts Hardware Labor Hours
0 See Online Store For Pricing & Availability 0

Description
Gear Torque Tools for setting proper torque values to gear down. Main Landing Gear Tool $155, Nose Gear Tool $135 (for Manual retraction systems only)— NEW –Powder Coated.